Fly Sky Receiver FGR4S
ArrayR 775,00
Description
Flysky FGr4S Receiver Built-in Single-Antenna Bidirectional PPM / IBUS Output for NB4 PL18 RC Transmitter
The fgr4 S uses afhds3( Third Generation Automatic Frequency Hopping Digital System). It uses a internal single antenna with two way transmission capabilities and is designed to be compact and
easy to install, It can output standard PWM, i-BUS and PPM
Specifications:
- Item Brand:Flysky
- Item Number:FGr4S
- Item Name:Receiver
- Material:Plastic and electronic components
- Product Size:25.5 22 x 17.3 mm
- Product Weight:About 5.1g
- Packaging Weight:Approx.8g
- Fit For:Flysky NB4 and PL18 transmitter
- Channels: 4
- Model Type: Car/Boat
- Data Output: PWM/i-BUS/PPM
- Frequency Range: 2.402-2.480GHZ
- Transmission Power: <20dBm(EU)
- RF Standard: AFHDS3
- Antenna: Built-in Antenna
- Input Power: 3.5V 8.4V
- Display: LED Indicato
- Online Update: Yes
- CH 1-CH 4: Connects the servos, power supply
- i-BUS: for channel expansion
- BIND: For bind cable
- Certification: CE, FCC ID: N4ZFGRS400
Binding:
- To ensure good signal strength, make sure the receiver antenna is as far away from any metal parts when installing the receiver
- Insert the bind cable into the receivers BIND port;
- Plug the power cable into any other port, and the the receiver's LED will start to flash quickly indicating that it has entered bind mode
- Put the transmitter into bind mode; (See the transmitter's instruction manual for more information
- Binding is successful when the receiver's LED starts to flash slowly. Remove the power and bind cables from the receiver
- If the transmitter is bidirectional the receiver status indicator will not flash slowly
- Reconnect the power cable to the receiver
- Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again