FrSky Receiver S8R

Frsky S8R 16CH RSSI PWM Output Telemetry Receiver With Smart Port

The S8R is a FrSky X-series receiver with built in 3-a xis stabilization. For conventional Fixed Wing Models it will support stabilization, automatic level, hover and blade-edge flight modes, for flying wings and V-tail models it supports stabilization and automatic level flight modes. You can edit the type of model and manipulate all these features via the S8R.Config or S8R.lua. The S8R can also be used as a standard 8 channel X series receiver if it is required.

Tip: Use the S8R with 3-a xis stabilization as a slave receiver with the RB-10 to give you that extra peace of mind by buying you valuable time to bring your model home.

Features:

• Built-in three-a xis gyroscope and three-a xis accelerometer sensor module
• Built-in RSSI PWM output (0 to 3.3V)
• Built-in battery voltage detection
• Smart Port enabled

Specifications:

• Brand: Frysky
• Item number: S8R
• S8R (8CH/16CH receiver with built-in 3-a xis gyro and 3-a xis acceleration)
   
• 46.47x26.78x14.12mm(L x W x H)
   
• Weight: 14g
   
• Number of Channels: 16CH (1 to 8ch from conventional channel output, 1 to 16ch from SBUS port)
   
• With RSSI PWM output on board: PWM voltage output (0 to 3.3V), 100HZ, 1500 plus/minus 500us
   
• Operating Voltage R ange: 4.0 to 10V
   
• Operating Range: Full range
   
• Gyroscope Measurement Range plus/minus 2000dps
   
• Accelerometer Measurement Range: plus/minus 4g
   
• Firmware Upgradeable 
   
• Compability: Frsky Taranis X9D Plus/X9E/Horus X12S/XJT in D16 mode
   
• S8R-EU only works with Frsky Horus X12S and Taranis X9D Plus/X9E/X7/XJT in D16-EU mode.